For this pocket knife fob/lanyard, I used a length of gutted camo green paracord and tucked a 1/8" by 2" long misch metal mouse firesteel into the paracord sheath.
I tied a Celtic button knot on one end and worked the firesteel down against it.
I then tied a 17 lead 4 bight turks head knot of a single pass, with round 2mm dark brown leather over the paracord covered firesteel. Added a copper colored bead(from Hobby Lobby) and tied a scaffold/multiple overhand sliding knot to finish.
The pocket knife is a Victorinox Tinker. My previous post with with firesteel fobs/lanyards is linked here.
Here's a couple of the firesteels with a single strand of paracord in a two bight turks head knot, using less than 2 feet of paracord. To be worn as a pendant on a chain, a zipper pull, or added to a key ring.
And one using 3 feet of paracord as a lanyard for a Swiss Army knife...
welcome back, glad your better been missing my knot post..
ReplyDeleteThat is such a gorgeous work! Thanks for sharing.
ReplyDeleteGreat work. Your video tutorials are excellent-really helpful. What's the music you used on the lanyard knot video?
ReplyDeleteThanks,
Alex
@Alex, the YouTube audioswap music for the lanyard knot video is The Tar Baby' by Ryan Kickland.
ReplyDeleteThanks for that. Great music.
ReplyDeleteAlex
Nice work. I also liked the past post on fire steel. I do have a question. Is the steel there as an emergency use only item or can it be accesed readily for daily use? Am I missing something?
ReplyDeleteEd D.
@Ed D, firesteels that are tucked into knot work are usually for emergency use, if other fire starting tools, like a lighter or matches aren't available when needed.
ReplyDeleteThe way this one was tied, it can be worked out after untying the scaffold knot, and worked back in place, but it wouldn't be quick and easy.
This firesteel is fairly thin and small, but still works. There are many different sizes available, even some with fixed handles made of wood or bone. Some knife sheaths are even made to accommodate a firesteel alongside a fixed blade, for those that use them often.
Glad to hear you are feeling better. I was wondering if you had any tips / tricks / suggestions on making the long turks head knot used in this as well as your 10/18 and 10/10 postings? I have tried the tutorial you linked to a few times. I tend to better with moving visuals as apposed to still images, so was just wondering if you had some suggestions of what to pay attention to more or where else I could look? Beautiful work by the way!
ReplyDeleteZelig
@Zelig, When increasing a two bight turks head knot into a four bight, you have to pay close attention to the over and under sequence in Bud Brewer's tutorial, especially where the over 2 under 1 cords go.
ReplyDeleteSome folks mess up at the ends where you go up over one bight then down over the bight next to it, then under... It's there in Bud's tutorial, and if that's where you've had trouble, when you see it, you get that 'Ah ha!' moment when you figure it out.
David,
ReplyDeleteGreat Job! I am trying myself to find a good way to incorporate a firesteel and compass onto the "survival" bracelets. I picked up some of the whistle buckles and have made a few with them. Looks like even the smallest firesteel blanks need to be cut smaller. I am guessing the only way to incorporate the steel into the bracelet is to cut them smaller and lash over it with the stitches.Either that or make a sheath as you have done and lash it onto the bracelet somehow. :)
kudos great work as always
ReplyDeleteMerry Christmas!
Thanks Stormdrane I see what you mean. I see and get it. This is a great Fob/Lanyard Great for EDC and safety.
ReplyDeleteThanks, Ed D.
I took your ideas and modified them, by placing the fire steel in the gutted 550 cord and tying the celtic knot on one end like you explain, then I simply leave about 4 inches of cord, which I then tie on to the zipper of my hunting and ski coats, I also tied one on my keyring. The zipper pulls as I call them, make it easier to operate with glove or mittens and it is always with me. Thanks for your outstanding site, I have learened so much.
ReplyDeleteHello,
ReplyDeleteThanks for all your posts. I have a question: What flashlights are noted in the 2/10 and 2/17 pictures?
Thanks.
Russ
@Russ, The flashlights in those posts are a Jetbeam C-LE V2, and a Streamlight Keymate.
ReplyDeleteHi,
ReplyDeletegreat article.
what size paracord you were using to fit the 1/8" steel inside? 4mm?
@Anonymous, I've used 550 and 450 gutted paracord to fit in the 1/8" x 2" firesteels and with the slight variations in diameter from different paracord manufacturers, the 1/8" firesteels still fit inside all of them.
ReplyDelete4mm, 5/32", 3/16" is the usual range in diameter for mil-spec and commercial grade 550 paracord.
The next size up in firesteels was 3/16" and it was too tight/snug a fit with the paracord I had.
Hi, do you have a tuutorial for the knot in the picture with a quarter coin?
ReplyDeleteI do have a tutorial for a two-bight Turk's head knot lanyard, with that being the same knot that is used with the firesteel fob, just with a single pass, using a two foot length of gutted paracord with a 1/8" firesteel tucked in one end, then the two-bight Turk's head knot tied around it, add a split ring, then the working end is tucked down through the center of the knot out the other end, tighten the knot up and trim the excess.
ReplyDelete