Saturday, August 06, 2016

Breaking the drought...

First hard cider purchase of 2016, Original Sin, from the local Eagle's Landing Bottle Shoppe.

The neoprene bottle sleeve/koozie was an online contest prize that I won, and it even has a built in bottle opener.  The zipper has a ring type pull, and instead of cutting it off and adding a paracord pull, like a crown sinnet, I left it on and did some ringbolt hitching with a few feet of red 0.9mm string.

The hitching needs a brush on coat of krazy/super glue to keep it from twisting from handling over the smooth metal ring though.

There's a couple of raised sections on the bottom part of the ring that could probably be filed down flush with the rest of the ring, but I just left it alone, working the cord around it.

On a side note, I'd watched Hinterland on Netflix months ago, and the main character often wore a jacket with a similar zipper pull, and every time I saw it on screen, I couldn't help but think it needed some knot work on it, lol...

I used my Leatherman Brewzer one-piece multitool to lift the bottle caps.

Held firmly, it only takes a single pull to remove the caps, so thumbs up on bottle opener function, and it works well also as a prybar, fingernail cleaner and standard screwdriver, kept on my edc keychain.  It replaced the Gerber Shard that had been there for a while previously, also a decent keychain edc. 

I'd added a gaucho knot variation with 0.9mm cord a few years ago after I purchased the tool, and it's starting to look worn, but I figure I'll just leave it alone until it frays and starts coming apart before I decide if I'll add another...





I'm an Amazon affiliate, so 'Thank You!' to those that shop there through my links, since I receive a small commission from sales through those links posted in my blog.

If you need an edc backpack, check out the limited edition VENOM and VENOM RED mochi drawstring backpacks with Stormdrane logo, which I receive a percentage of sales from, each having a stitched paracord handle that I worked with Mochibrand on for the design.

1 comment:

Anonymous said...

Something else you can do to this neoprene is slide a couple neodymium rare earth magnets next to the bottle opener. This will be more than enough hold up strength and is an awesome addition. I went and found a bunch of these online and really want to create something with them. I'm not a schil for websites, but magnet4less.com has some cool stuff that I think I'm going to integrate to little stuff. Thinking about wrapping my TV remotes with some ornate cord work that covers a couple of these magnets allowing for remotes to be organized on a wall mount of some kind. Hope this gives you some cool ideas, I know I have a few!

Tom